Back

MXE 1000 WR2 120 + WR3R 120

1010 watt 1-speed mixer with accelerator trigger switch

Standard supply
Technical data
Power consumption1010 W
Power output550 W
Voltage230 V
Frequency50/60 Hz
Max. mixing basket diameter120 mm
Tool holder, mixerM14
No-load speed, 1st gear0 - 780 rpm
Clamping collar diameter53 mm
Cable length4.0 m
Dimensions WxLxH405 x 215 x 340 mm
Weight4.5 kg

Advantages

  • Large, rugged single-speed gear unit with optimum gear ratio for high torque
  • Proven standard mixer is ideal for users operating mainly in the low speed range
  • With mixing paddle WR2 for mixture: pasty to tough. Tile adhesive, grout, filler compound, adhesive, finished plaster, adhesive mortar, ...
  • Protective cap above the motor housing guides the cooling air flow and prevents the ingress of splashing water
  • The flexible rubber sleeve over the on/off switch prevents the ingress of dirt. No malfunctions caused by jammed switches
  • On/off switch with lock and protection at power interruption. Ideal for stationary operation in a mixing station
  • For mixed applications up to 40 kg
  • Full-wave electronic control: with soft start, temperature monitoring, overload protection and accelerator switch - for a controlled run-up to the optimum mixing speed. Sustained power in all speed ranges
  • Ergonomic handles on the drive unit: low weight, fatigue-free arm posture and upright body posture allow comfortable, ergonomic operation
  • Four corner guards with rubber buffer provide secure storage during transportation and offer protection against shocks and impacts at the building site
  • With mixing paddle WR3R for mixture: tough to heavy. Mortar, plaster, screed, concrete, ...

Matching accessories

  • Helix paddle WR2
  • Helix paddle WR3R

Our FLEXperts are there for you.

Contact

Your local dealer